Volumetric Pipets
Pipets calibrated to accurately contain a fixed amount of liquid and typically designated as ‘to deliver’ (drained by gravity). This pipet has a reservoir between two elongated sections and, typically, a single graduation mark, and may deliver volumes ranging from 0.5 to 100 mL or more.
Volumetric pipettes, also known as bulb pipettes, are manual liquid handling devices used in laboratories to transfer and dispense a single, specific quantity of liquid to a very high degree of accuracy. They are normally used in conjunction with a suitable pipette filler for user safety.
Volumetric pipettes may be made from clear borosilicate glass or soda lime glass. Amber glass versions are also available for light-sensitive samples. Pipets may be designated as Class A or Class B depending on their accuracy and tolerance, and may also be certified or serialized, with documented manufacturing standards, compliance, conformity, and traceability.
What is a Volumetric Pipette Used For?
Volumetric pipettes have many uses in the laboratory or the wider working environment:
• Creation of serial dilutions and stock solutions
• Titrations and volumetric analysis
• Routine handling of analytical solutions, cell culture media, organic chemicals, solvents, and other liquids
Alkali Scientific Graduated Cylinders, Polypropylene (PP), Molded Graduations, 25mL, 24/Case
These economy graduated cylinders are manufactured from durable polypropylene (PP) and are designed for routine liquid measurement in laboratory, educational, and research environments. Permanently molded graduations provide clear volume markings that will not fade, chip, or wash away over time. The light and impact resistant polypropylene construction offers good chemical resistance and makes these cylinders a practical alternative to glass for everyday laboratory use. The economy design provides reliable performance while maintaining cost efficiency. Available in volumes from 10 mL to 500 mL, these cylinders are suitable for sample preparation, reagent measurement, and general laboratory liquid handling procedures.
SIGMA ALDRICH FINE CHEMICALS BIOSCIENCES PYREX VOLUMETRIC PIPETTE 2ML
NC3822771 PYREX VOLUMETRIC PIPETTE 2ML
SIGMA ALDRICH FINE CHEMICALS BIOSCIENCES PYREX VOLUMETRIC PIPETTE 1ML
NC3822774 PYREX VOLUMETRIC PIPETTE 1ML
Bellco Glass, Inc. Canister Mounting Plate
Stabilizes pipette canisters during useStainless steel constructionUse with 38mm od glass pipette canistersDimensions:90 x 90mm. MADE IN THE USA Case qty-6
Alkali Scientific Graduated Cylinders, Polypropylene (PP), Molded Graduations, 10mL, 24/Case
These economy graduated cylinders are manufactured from durable polypropylene (PP) and are designed for routine liquid measurement in laboratory, educational, and research environments. Permanently molded graduations provide clear volume markings that will not fade, chip, or wash away over time. The light and impact resistant polypropylene construction offers good chemical resistance and makes these cylinders a practical alternative to glass for everyday laboratory use. The economy design provides reliable performance while maintaining cost efficiency. Available in volumes from 10 mL to 500 mL, these cylinders are suitable for sample preparation, reagent measurement, and general laboratory liquid handling procedures.
Sino Biological 20μL Manual single channel Pipette,Universal
20?L Manual single channel Pipette,Universal
Bellco Glass, Inc. Round Bottom Canister complete,38x135mm
ROUND BOTTOM GLASS PIPETTE CANISTER. MANUFACTURED FROM TYPE 1, CLASS A BOROSILICATE GLASS COMPONENTS WILL WITHSTAND REPEATED DRY OR STEAM HEAT STERILIZATION MADE IN THE USA CASE Qty: 6
Alkali Scientific Graduated Cylinders, Polypropylene (PP), Molded Graduations, 50mL, 24/Case
These economy graduated cylinders are manufactured from durable polypropylene (PP) and are designed for routine liquid measurement in laboratory, educational, and research environments. Permanently molded graduations provide clear volume markings that will not fade, chip, or wash away over time. The light and impact resistant polypropylene construction offers good chemical resistance and makes these cylinders a practical alternative to glass for everyday laboratory use. The economy design provides reliable performance while maintaining cost efficiency. Available in volumes from 10 mL to 500 mL, these cylinders are suitable for sample preparation, reagent measurement, and general laboratory liquid handling procedures.
Foxx Life Sciences Borosil® Reusable Class B Volumetric Transfer Pipettes (Pipets), 9mL, 10/CS
Borosil® Reusable Class B Volumetric Pipettes are with One Mark for accurate measurement and decanting of liquid. Calibrated for delivery (TD). Manufactured with sturdy, consistent wall thickness. Reusable. Uniform inner bore diameter for smooth flow. Beveled tips resist chipping. Pipettes can be autoclaved and, if necessary, flame-sterilized. Borosil® Volumetric Pipettes are graduated for delivery from the capacity mark to the tip, without "blowing out" the droplet remaining in the tip after dispensing. Borosil® Class B Volumetric Pipettes comply with ASTM E-969-02. Available in sizes ranging from 1mL to 100mL. 30mL and 40mL options are not covered by ASTM standards. Manufactured from the same USP Type 1 borosilicate glass that North American scientists have come to trust, Borosil® Laboratory Glassware offers unparalleled mechanical strength, clarity, and reliability at competitive prices.
Foxx Life Sciences Borosil® Reusable Class B Volumetric Transfer Pipettes (Pipets), 25mL, 10/CS
Borosil® Reusable Class B Volumetric Pipettes are with One Mark for accurate measurement and decanting of liquid. Calibrated for delivery (TD). Manufactured with sturdy, consistent wall thickness. Reusable. Uniform inner bore diameter for smooth flow. Beveled tips resist chipping. Pipettes can be autoclaved and, if necessary, flame-sterilized. Borosil® Volumetric Pipettes are graduated for delivery from the capacity mark to the tip, without "blowing out" the droplet remaining in the tip after dispensing. Borosil® Class B Volumetric Pipettes comply with ASTM E-969-02. Available in sizes ranging from 1mL to 100mL. 30mL and 40mL options are not covered by ASTM standards. Manufactured from the same USP Type 1 borosilicate glass that North American scientists have come to trust, Borosil® Laboratory Glassware offers unparalleled mechanical strength, clarity, and reliability at competitive prices.
Foxx Life Sciences Borosil® Reusable Class B Volumetric Transfer Pipettes (Pipets), 6mL, 10/CS
Borosil® Reusable Class B Volumetric Pipettes are with One Mark for accurate measurement and decanting of liquid. Calibrated for delivery (TD). Manufactured with sturdy, consistent wall thickness. Reusable. Uniform inner bore diameter for smooth flow. Beveled tips resist chipping. Pipettes can be autoclaved and, if necessary, flame-sterilized. Borosil® Volumetric Pipettes are graduated for delivery from the capacity mark to the tip, without "blowing out" the droplet remaining in the tip after dispensing. Borosil® Class B Volumetric Pipettes comply with ASTM E-969-02. Available in sizes ranging from 1mL to 100mL. 30mL and 40mL options are not covered by ASTM standards. Manufactured from the same USP Type 1 borosilicate glass that North American scientists have come to trust, Borosil® Laboratory Glassware offers unparalleled mechanical strength, clarity, and reliability at competitive prices.
Alkali Scientific Graduated Cylinders, Polypropylene (PP), Molded Graduations, 500mL, 8/Case
These economy graduated cylinders are manufactured from durable polypropylene (PP) and are designed for routine liquid measurement in laboratory, educational, and research environments. Permanently molded graduations provide clear volume markings that will not fade, chip, or wash away over time. The light and impact resistant polypropylene construction offers good chemical resistance and makes these cylinders a practical alternative to glass for everyday laboratory use. The economy design provides reliable performance while maintaining cost efficiency. Available in volumes from 10 mL to 500 mL, these cylinders are suitable for sample preparation, reagent measurement, and general laboratory liquid handling procedures.
Bellco Glass, Inc. Sykes-Moore Chamber Only
Study cells by high magnification, phase optics or time lapse. Cover-slips are separated by a silicone gasket to maintain internal seal. Sykes Moore wrench assembly is required and sold separately. 2.83 cm2 viewing area holds approximately 0.65 to 0.75mL. Made from brass. Chamber Only 0.250” x 1.250”
Research Products International Corp Glass Pasteur Pipets
High quality borosilicate glass Pasteur pipets are ideal for inoculating culture media and transferring samples and reagents. Pipets can be used with aspirating bulbs or attached to a vacuum apparatus.